A – A minimum of 2” (two inches) thick for the ice to stay solid and hold the weight of a 300lb person is required. For the municipal rinks, we recommend at least 3” (three inches).
He notes that the tarp isn’t always necessary, pointing out that most municipalities make the ice directly on grass or asphalt. “You do it in layers,” he said, “You spray a little layer first and then you layer it on. That’s how the cities would do it.”
The Traditional Method of making ice for your outdoor rink is the oldest method and is done by packing snow and then spraying it with water. This is still a very efficient approach as long as you get snowfalls early enough in your area and as long as you are building your rink in an area that has really cold winters.
Use a 6 mil white Rink Liner. We cannot overstate the importance of this. Some of our competitors are selling a “7 layer” liner that is 5 mil. There is no benefit to many layers.
Use packed snow, wood boards, or pvc pipe to create a border and provide a minimum 3″ lip which will contain the water. The ice should be at least 3″ thick to hold an average adult. 3. Apply several light sprinklings of water to freeze before flooding the rink.
Typically, rink tarps are very suitable for backyard ice rinks. They are made from a medium- or heavy-duty form of plastic – polyethylene, or simply ‘poly’. Apply your rink tarp up and around your rink boards. … Tarps are very durable, resist water, wear and tear, and are used in mild as well as cold temperatures.
Old Fashioned Backyard Ice Rinks
You do not need a plastic liner or tarp if you are making an old fashioned backyard ice rink (traditional). In order to make ice, you simply pack snow, flood the snow surface with water and allow it to freeze. You can make this traditional backyard ice rink with or without boards.
You must remove all the snow from your ice rink in order to flood. You will need shovels. … Ice that is only frozen on top is not suitable for skating, since the shell breaks when weight is applied on it. You need to make sure your ice is completely frozen before re-flooding your ice rink.
When should I set up my rink? The best time to set up your backyard rink is just prior to when the temperature drops below freezing. This is for two reasons. First, you want to be all set up and ready to fill/flood when the freezing weather arrives.
You’ll get some snow over the winter months, but do your best to keep the DIY ice rink cleared as snow acts as an insulator and will quickly stick to the ice.
According to the Ice Skating Institute, the cost for a single surface ice skating arena is between $2 and $4 million, while a twin surface ice skating area costs between $5 and $7 million.
Without a liner, rink builders must wait until they have confidence with cooperative consistent freezing cold weather. An unlined rink built too early could end up being a total waste when you are solely counting on frozen ground to connect saturated water puddles.
Take care of your ice
Regularly flood your rink with a layer of water—an ice resurfacer and a thin layer of hot water will help you create a smooth surface. The ideal temperature to flood your ice is between -7 and -20 degrees Celsius.
You should try and use a rink liner that is at least 5 mil thick. 6 mil is excellent. For the most part, I’ve been using 6 mil plastic liners.
Using a metal snow shovel (Garant YSP24DU Yukon 24-Inch Steel Blade Snow Pusher works really well or you can buy a plastic shovel with metal tip), I scraped the ice surface to remove any irregularities and some leaves.
The markings (lines, circles, creases, etc.) are painted onto a half-inch thick sheet of ice, which is sprayed onto a concrete floor that has frozen pipes imbedded. An additional coating is applied to secure the markings and build the ice up to the prescribed thickness.
Ice skating rinks can bring in hundreds of thousands of dollars annually, but much of their revenue goes towards operating expenses. Many ice rinks aren’t profitable unless they’re debt free, which is why municipalities often run or subsidize rinks.
Shariff says you should never flood during a cold snap because it produces brittle ice that easily cracks. If that does happen, Shariff says you just need to wait until the temperature rises. Then fill the cracks immediately with a mixture of of water and snow and give your rink a warm water bath to smooth things out.
Your ice rink liner will last 1 to 3 years. While it is best to replace the liner every year, some people will reuse the liner. I have reused a liner for 3 years to make sure it could be done. You would have to patch any holes from skates, shovels, and sticks.
making an ice rink on grass
how to make an ice rink in the summer
diy ice rink
ice rink kits home depot
home ice rink
backyard ice rink
diy ice rink kit
ez ice rink